4WD enthusiasts have greater control over tyre pressure with Air-Seal®
Air-Seal® for 4WD reduces probability of punctures, or slow air leaks.
Tyre punctures and damage to tyres don’t need to be as frequent or costly in 4WD adventures, when tyres are installed with Heavy-Duty Air-Seal®.
Not only does this sealant technology prevent punctures, 4WD enthusiasts will be happy to know it enables greater control over tyre pressure, which is the most critical thing you can control when off-road. It is literally the difference between getting stuck and cruising through!
Benefits of Air-Seal® for on-off road 4WD tyres:
- Minimal air-loss, the moment a penetration occurs to a tyre. The air pressure inside forces the Air-Seal® solution to plug the hole in the tread area preventing any further air loss within three revolutions of the wheel. This action is so rapid that the driver may not know a puncture has happened and they can continue along their way.
- Prevents air leaks around the tyre bead and wheel rim
- Provides protection from hazardous conditions including rocks, potholes, sticks or tree roots etc.
- Works in dry and wet conditions (including under water)
- The cost of one treatment is no more than conventional repair methods hence you are saving the moment you install Air-Seal® and it seals your first puncture!
How much Air-Seal®
do I need?
Air-Seal® Suitable for:
- 4WDs- On-Road 4WD
- Off-Road 4WD
- Buggies
- 4WD Cars
Waste Management
Fleet Manager
Andy’s testimonial:
I was recommended to use Air-Seal® in the tyres of our Caterpillar Loaders, Manitou and Bobcat.
Before using Air-Seal® I was getting 2 puncture repairs done a week, costing me $450 each tyre repair!
Now after one year of having the Air-Seal® products in my tyres, I haven’t had to pay for one puncture repair!
So in the first year of using Air-Seal® I have saved $46,800! It has also saved me down-time on working vehicles.
How much Air-Seal® will I need?
This product recommended application for 4WD vehicles is: On-road 475 mL/tyre, Off-road 950 mL/tyre.
You can order Heavy-Duty Air-Seal® in 950 mL bottles with a valve core tool, installation tubing and full instructions for use. A source of compressed air or a foot pump will be required to re-inflate the tyre after application. During installation avoid the sealant being swallowed or splashed in the eyes.
Air-Seal® for recreational use can be supplied in convenient packs of 12 if requested or individually and it has an infinite shelf-life. Bulk orders are also possible.
This tyre sealant is also 100% reusable, either from old tyre to new or old tyre to bulk container.
Contact us here at Air-Seal® Australia to order or to speak with our installation specialists about installing Air-Seal®.
